How Do Strip Grates And Drains Work?

strip drains

Strip grates and drains are a classic part of the plumbing system. They’re often used to drain sinks, tubs and showers, but they can also be found in other places like kitchens and bathrooms. Strip drains are made up of several layers that include a metal pipe called the flange that sits inside a plastic pipe called the strainer sleeve to know more just click here. Together these two pieces allow water to flow out of your home’s plumbing lines when there’s too much pressure on them or if you have clogs elsewhere in your pipes (like an overflowing toilet).

Strip drain

Strip drains are used to drain materials that are too large to be drained by a subsurface drain. They can be made of perforated PVC pipe and are usually installed in residential and commercial applications.

Strip drains work by allowing water to flow through a series of small holes in the pipe, which allows it to travel more freely than it would if it were just one continuous tube. This makes them ideal for removing excess water from your home’s basements, garages or crawl spaces wherever you might have water problems.

How do strip drains work?

Strip grates and drains are used to remove excess water from a property. They are installed at the lowest point of your property, and they’re connected to the surface with a pipe. Strip drains can be installed in a trench or hole if you want to hide them, but if you don’t mind having them visible on your house then it’s best to install them where there’s room for them for example: near where your main sewer line enters.


Strip drains are a type of subsurface drainage system that can be used to remove excess water from your home. Strip drains are particularly useful in commercial settings, such as shopping malls, office buildings and schools. They’re also commonly used in residential areas where they help maintain water quality by preventing ground-water infiltration into your home’s foundation walls.

The design of strip drain systems varies slightly depending on the material used for each section of pipe—some strips have round or square cross sections while others are slanted at an angle. In addition to being constructed out of durable materials like metal or concrete (which will last decades), some strip drains even come equipped with gauges so you can measure how much water is flowing through them at any given time.


Strip drains are an alternative to open ditches, and they can be used to remove water from a building site. The strip drain system consists of one or more horizontal trenches filled with compacted clay and sand that have been grouted with a special glue. Strip drains are designed to carry storm water away from your home and onto the ground so it doesn’t damage your foundation or interfere with foundation drainage systems.

Strip drains are made of durable plastic materials like polyethylene or polypropylene, which means they will last longer than traditional metal pipes would. They’re also easier to clean because they’re not corroded like metal pipes can become over time; instead, you simply need an acid-based cleaner (like bleach) on them every few years after installation!


With the right equipment, you can use strip drain to make your home more energy efficient. In this article we have covered everything you need to know about strip drains including how they work and how much they cost. We hope this information has been helpful.

You May Also Like

About the Author: John Abraham

Leave a Reply

Your email address will not be published. Required fields are marked *